At MIT, we are given the month of January off from classes to pursue our own interests, whether they be career-oriented or hobby-based. During these five weeks, I have worked at PSS as a power electronics intern. My time at PSS has given me the opportunity to explore so many of the industry based applications of electronics and electrical engineering amongst some of the most innovative minds in the aerospace and energy industries.
Within the GAMOW (Galvanizing Advances in Market-Aligned Fusion for an Overabundance of Watts) project, my work centered around helping redesign, assemble, and test a power load switch, the resulting prototype of which is shown above. Within this project, I received a wide array of experience ranging from 3D-modeling PCB boards with Eagle software, to physical board assembly, to designing testing procedures for the completed board. Initially, I worked on redesigning the load switch PCB to reduce loop currents and noise. My next steps were to source and order all needed components for in-house assembly. During the assembly process, I worked with both a soldering iron and hot air rework station to assemble surface mounted devices (SMDs) and through-hole components.
I also dipped into some software based components of the project, programming in C and Python to create hardware based signals to our desired testing specifications. Specifically, I was aiming to make Pulse Width Modulation (PWM) signals of a specific duration for the Raspberry Pi to output. This led to various tests on the outputs of the code, through the use of an oscilloscope (two PWM pulses on the oscilloscope are shown below). Ultimately, I had the chance to start testing the board in connection with a power supply and the Raspberry Pi’s program.
Moreover, I had the opportunity to dip into so many different branches of electrical engineering and project design. In attending meetings about all of the individual components of the massive GAMOW project, I saw how the team plans and executes each individual collaborative part of the project. This experience in the project process and cutting edge electrical project design as a whole have given me many insights into the professional world of electrical engineering.